![Rusty Duck Garage](/img/default-banner.jpg)
- 173
- 2 670 712
Rusty Duck Garage
United States
Приєднався 6 сер 2020
Rusty Duck Garage Chevy Silverado and Chevy C10 Trucks. Will it run?
IMG 2024 Bonneville Speedweeks 34 Ford Roadster
Just a quick little video of a 1934 Ford roadster at the nugget casino in West Wendover, Nevada near the Bonneville Speedway
Переглядів: 301
Відео
IMCA Stock Car Racing Speedweek 2024
Переглядів 1412 місяці тому
Today we go racing with Sean Gentrys 2G Monte Carlo in Roseburg Oregon at the Douglas County Speedway. This race is one of Seven races this week in the IMCA Speedweek Series for the Northwest. We will also race at Willamette Speedway, Cottage Grove Speedway and Sunset Speedway in Banks Oregon.
32 Ford Roadster Offy Twin Overhead Cam REM 4 Cylinder
Переглядів 2,7 тис.2 місяці тому
Today we have my 1932 Ford Roadster equipped with a Dual Overhead cam model B 4 cylinder engine. It has a REM Offy overhead valve conversion that was built by Robert E McKinney of California. It also has a 5 main crankshaft etc. Bill Manly was the owner of this car when the engine was built. This car ran at the Auburn Hill Climb in 2019 and was the winner in its class.
Classic 1953 Studebaker with Tuned Port Injection
Переглядів 2552 місяці тому
Dave Elwell of Coos Bay Oregon built this 1953 Studebaker using a 350 Tuned Port Injection engine from a 1992 Camaro 1LE B4C police car. Dave also owned the Hop Drive In Resturant in Coos Bay where he built Molly a huge Neon lighted sign. Molly is now in the LeMay car collection in Tacoma Washington.
Will it run? 64 Chevelle Super Sport runs strong. 4 Speed. Project Car
Переглядів 2922 місяці тому
I bought this 1964 Chevrolet Chevelle Super Sport from a friend of mine who owned it for 30 years. He had rebuilt all the suspension, brakes, transmission, clutch, differential, etc. making it a very nice driving 60 year old car. I review the car and take it for a drive. The 327 engine in this car has 11.1 compression with a 350 hp 327 cam, double hump heads, fluid dampener, crower rods etc. Th...
1967 Chevy C10 Budget Build Part 2
Переглядів 3163 місяці тому
I have 1967 Cavemen Motorhome mounted on a Chevrolet C30 chassis. I removed the cab in the front end and installed it on a short bed C10 frame. I will be installing a 5.3 LS engine and an automatic transmission for 4 L 60 E. We will be running the 73 to 87C 10 suspension and rear end with a 5 x 5 lug pattern. Truck will be lowered 4 inches in the front and 6 inches in the rear. I will be instal...
Electric Silverado EV Wrecked 2024 All New
Переглядів 1,9 тис.4 місяці тому
This is one of the first if not the first Silverado EV that is available to the general public. Although it is damaged! I went to this auction with the intent of buying this truck. I didn't get the truck. Buying parts for this new of truck could be a real problem. With a range of 450 miles the new Chevrolet Silverado EV is impressive.
1967 Chevy C10 Budget Build Short Bed LS
Переглядів 5094 місяці тому
In this video I start the build of a 1967 Chevrolet C10 Short Bed build that will have an LS engine and automatic transmission. I start with a 1967 Caveman Motorhome that is on a C30 two wheel drive chassis. I will install a short bed frame and an LS engine.
Barrett Jackson 2024 Chevy C10 Trucks
Переглядів 3,9 тис.5 місяців тому
I attended the Barrett Jackson Classic Car Auction in Scottsdale Arizona and saw some amazing short bed C10 pickups sell across the block. One of them sold for $300,000 plus $30,000 in selling fees. It was an awesome truck! There were other trucks that sold for less money that were also very nice. It was very hard to determine what the high bid would be. Even one of my old pickups sold at this ...
Barrett Jackson 2024 $330,000 C10 Chevrolet
Переглядів 1,3 тис.5 місяців тому
This1967 Chevrolet C10 pickup sold for $300,000 plus another $30,000 in fees! I look into way this truck sold for so much money. Magnason Supercharged LS3 and a 4L60 transmission.
Barrett Jackson 2024 $440,000 K5 Blazer
Переглядів 3,3 тис.6 місяців тому
Forty K5 Chevy Blazers at the Barrett Jackson Classic Car Auction in Scottsdale Arizona. My wife and I recently attended the auction. In this video you will see all of the K5 Blazers and how much they sold for including fees.
Road to Barrett Jackson 2024
Переглядів 6006 місяців тому
We travel from Amity Oregon to Scottsdale Arizona to attend the Barrett-Jackson Classic car auction. We does so traveling to Las Vegas, and Laughlin Nevada. Along the way we look at several cars and trucks that have not been on the road for years.
Unveiling the 2015 Silverado: An Affordable Truck with a Stylish Transformation
Переглядів 2427 місяців тому
Chevrolet Silverado 1500 2014 to 2019 pickups can be bought at a reasonable price and deliver years of service. I picked up this 2015 Chevy Silverado Work Truck recently and lowered it 2 inches in the front and 4 inches in the rear using the Rough Country Lowering Kit. I think the truck turned out awesome. Enjoy the video.
1967 Chevrolet Biscayne LS6 454 4 Speed L72 Tribute
Переглядів 1,2 тис.7 місяців тому
Today we have a low mileage survivor 1967 Chevy Biscayne / Impala two door. Big block 4 speed Muncie transmission.
1967 SS 396 Impala Convertible Barn Find and a 427 4 speed Biscayne
Переглядів 4,2 тис.7 місяців тому
Survivor Muscle car Barn Find. Will it run? My friend Polaris is buying this 1967 Chevrolet Impala Convertible. Super Sport, Big Block, 396 325 HP today in Eugene Oregon. He invited us to come along and check it out. Much to my surprise the car has been rarely driven in many years and the car started right up without a boost or cleaning of the fuel system. The seller Mike had done all. the righ...
31 Chevy Coupe Timing Adjustment and drive. How does she run?
Переглядів 9018 місяців тому
31 Chevy Coupe Timing Adjustment and drive. How does she run?
Harley Davidson F150 for Under $5,000.00
Переглядів 3478 місяців тому
Harley Davidson F150 for Under $5,000.00
Ford Bronco Base Model Drag Racing and Bronco Show
Переглядів 2108 місяців тому
Ford Bronco Base Model Drag Racing and Bronco Show
2010 Chevy Duramax Bad Transfer Case Auction Buy
Переглядів 2338 місяців тому
2010 Chevy Duramax Bad Transfer Case Auction Buy
Harvest Drags Car Show and Swap Meet Flathead Fords Part 2 of 3
Переглядів 44010 місяців тому
Harvest Drags Car Show and Swap Meet Flathead Fords Part 2 of 3
Harvest Drags - Old Cars, Roadsters, Coupes and Taco Coupe. Part 1
Переглядів 80710 місяців тому
Harvest Drags - Old Cars, Roadsters, Coupes and Taco Coupe. Part 1
1931 Chevy Coupe No Vice Grip Needed. This is a nice old car
Переглядів 80410 місяців тому
1931 Chevy Coupe No Vice Grip Needed. This is a nice old car
Chevy Silverado OBS Random Misfire C10 PO300 Vortec 350
Переглядів 1,5 тис.10 місяців тому
Chevy Silverado OBS Random Misfire C10 PO300 Vortec 350
Dodge Challenger Hellcat Manual: Non Operational? How did I get it Home? Hell Cat
Переглядів 28611 місяців тому
Dodge Challenger Hellcat Manual: Non Operational? How did I get it Home? Hell Cat
Is a Nissan Leaf any Good? Is it a throw away? Environment, Gas Saver, Fuel Economy.
Переглядів 52511 місяців тому
Is a Nissan Leaf any Good? Is it a throw away? Environment, Gas Saver, Fuel Economy.
Cruising McMinnville 2023 Car Show and Cruise
Переглядів 73311 місяців тому
Cruising McMinnville 2023 Car Show and Cruise
2023 Great Oregon Steam Up Antique Powerland Heritage Park Trains
Переглядів 11 тис.Рік тому
2023 Great Oregon Steam Up Antique Powerland Heritage Park Trains
Lowering a NBS Silverado 4-6 Drop Cat Eye
Переглядів 30 тис.Рік тому
Lowering a NBS Silverado 4-6 Drop Cat Eye
Hidden Treasure Unveiled: 1940 Ford Coupe Barn Find #fordcoupe
Переглядів 456Рік тому
Hidden Treasure Unveiled: 1940 Ford Coupe Barn Find #fordcoupe
Will I need to notch my frame to install 5” lowering coils in the rear??
Where did you get the side mirrors? Or did they come with it already?
As the owner of a 1984... avoid it at all costs! They didn't come out with the new Tuned-Port Injection L98 engine until 1985. The 1984 model has a massively choked Crossfire Injection that makes the least amount of horsepower of ANY other Corvette model, including the 1950's C1!
Good thing I’m ls swapping mine
@@EdgarVarelaSandoval same, looking for a 6.0L LS3
I bought the 2001 green Aztek in November 2000. I loved it, I had people make fun of me but I didn’t care. I had that car for 10 years & I drove it from west coast to east coast a few times. Almost 300,000 miles. I loved the futuristic look. My oldest son said it looked like a funky space shuttle from Star Trek. Too bad they stopped making them.
Just try to reframe from stater fluid. The motor might depend on it if you keep using it. And not good for the motor!
Perfecto!
They should hire you for marketing. This was really informative.
What would cause a 1996 Vortec 5.7 lose spark to ONLY two cylinders (1&2)? On third distributor and still no fix. New wires. New coil. New OEM Delco distributor cap. Distributor set to 0* for cam sensor using AUTEL scan tool. Anyone before I pull my hair out????
Beautiful
Really nice truck!!
I bought a 67 Chevelle Malibu two door ht 327 powerglide with very rare factory 8 track w 5 speakers, speed warning indicator ( littl adjustable needle on the speedo) factory AC , cruide control , tilt wheel , very rare walnut steering wheel just like this one ,same black buckets interior , rally wheels 295horse 327 but the original lady owner I bought it from in 1978 in Pasadena Ca had factory ordered it brand new at the dealer there and didnt order console, so it had a rare 2 sp on the column so it looked odd with buckets no console. This car was garaged from new with 45000 orig miles , cream beige with black interior , comepletlly rust free Cali car in spectacular original condition , I paid 1350 for it and after owning fifty cars , it remains the nicest car I ever owned . Never seen another since so optioned out althoughthis oen comes close. Nice truck!!!!
How much inches did u take off the driveline ?
Nice truck I have a 01 single cab looking to do the front drop spindles and do a notch I already have the flip kit installed would I need to buy a 2 piece drive shaft or can I still run the original??
You should be fine cause your not going low low if you go lower then 4/6 you’ll need one for sure
I had 85 coupe 40 yrs ago. Loved it. It was very reliable after the transmission was rebuilt.
I guess it was around 1970, I was 15, my grandmother took me to the very first Great Oregon Steam up. At that time it was just a large hay field. I think they had one large steel display/shop building. I recall seeing a number of large Case steam traction engines and a number very large gasoline power tractors as well as many smaller ones. The Yuba is one I remember. It was gray color, had tacks in the back and a metal ball type front wheel for steering Sad to think that most of the presenters of that time are gone now but happy to think that a new generation has taken hold and continuing the tradition.
Im from Oregon and I own a c4 corvette exactly like this and I love it
Nice work
I have 1979 Chevy c10 Bonanza super Ten . No rust . One owner . Should I convert to short bed ??? Any advice thank you
What about not cutting the frame? Just moving forward the hangers?
The head is cast also.
Wow I love it
Any idea what the paint code is for this color?
None of these Cars were ever available To the public so who cares of there history or existence
Cool cars! I think I even saw a Rolls.
Too bad it’s glass
I bought it. The thing most people don’t understand is when you work hard your whole life, been broke most your life and you become wealthy on your own and find something you really like. You buy it. I have no problem spending money on cars. I will never sell it. This guy tries to justify the build the whole video. Hes right, on paper the truck is worth 180 if that. It sold for 330 why? Because I wanted it that’s why and it didn’t put a dent in my account 😂 this isn’t some magical wonderland it is very nice truck. Not over modified like 95% of the other c10 trucks. It’s classic and the build was kept original. Call me crazy, I was sober when I was on the stage.
“I don’t rev it too high” and proceeds to light the road on fire
If it had a 5sp oh 💩
👍👌
Thank you for sharing this with us. How appropriate a Rocket 🚀 visiting the "Spruce Goose." Thank you again, my '98 is green and white, the interior was like being in a movie theater, brocade upholstery and courteous lighting. They definitely had power.
Glad you enjoyed it!
That motor rivals an Ardun headed flathead in looks.
Love this car! Cheers!
Right on!
Do you have to have a dealers license for that auction?
No. You do not need a dealers license for this auction.
Any won ever used a nove car with left rear
Personally, I'd be more afraid of that Fram oil filter than the timing belt! Great job though, very nice car.
Fair enough!
Beautiful looking motor. Love the Weber carbs. I have a pair on my 84 Ford EXP.
Right on!
The front end sure reminds me of an Elcamino grill & lights
Very Similar.
Am I misremembering or is that a 1930 bonnet?
I'm not sure.
@RustyDuckGarage My 31 has a slight raised edge surrounding the louvers and the louvers run further forward on the sides. The earlier louvers were more to the back like yours though if I remember correctly.
5.9 is much better
I like the power of the 6.7
Great video! Who’s the cute chick???
That would be you!
great video. i like the paint!
Thank you! Looks much better.
You're Big 10 looks sweet. I like the stock white wheels with corporate dog dish covers on it. It's what I'm running on my 85 long bed. There is no definitive "best" whatever tires and wheels a person choses is what's important.
I agree! Different strokes for different folks.
I did a frame off restoration on a 66 C10 Chevy when I was a young man, I did the power steering and front disc brakes on the front like you were talking about. It worked out very well using later model components. Wish I had never sold that one, I miss it to this day. Great video, keep em coming
Very cool!
The engine has a nice lope to it. That's a nice cruzer for sure. Holy moly, 60 yrs. gone by? Nice video.
Right! 60 years! It was hard to say.
I'm looking at a turn key 84 Z51. Dash works intermittently. Red, auto. Can pick it up for $3,500.00. Any thoughts?
It's all about condition. Dash light issue is a common problem that can be fixed.
I'm looking at a turn key 84 Z51. Dash works intermittently. Red, auto. Can pick it up for $3,500.00. Any thoughts?
If it’s not going to be a daily driver go for it. You will easily spend thousands of dollars replacing aging parts on a 40 year old car. Driving a C4 Corvette is very fun
Hello, Are you interested in testing our products? We would like to invite you to test the Vented Rear Windshield for your 2021 Polaris General XP 1000
Yes i would like to test the vented rear windshield.
@@RustyDuckGarage Hi, thanks, please send your con tact info
Do you still have this truck -- I have 55 and have been looking for the Chrome drip rail if its for sale?
Still have the truck but it is not for sale.
Which auction was this?
Adesa dealer auction Portland.
Noway it brings those numbers again!!it’s good for us Square Body owners. Price keeps going up baby 💰💰💰💰🔥
I have to agree.